What are the common problems of rotary cutting machine ?

Today's rotary cutting machine can be used to spin out very thin veneers, but if the machine fails, the quality of the veneer will be affected and the production efficiency will also be affected. Therefore, let's follow the rotary cutter manufacturer to find out?

In fact, there are often problems in the process of using the products. At this time, we need to analyze from many aspects. The common problem is that the wood veneer is rolled. This situation is mainly caused by the narrow knife door or too high knife rest. The solution is very simple. The ram screws and adjusting screws at both ends should be loosened, the knife door should be relaxed, the height of the cutter should be lowered, and then the screws should be tightened. In this way, the problem of wood veneer rolling can be solved.

The encoder or electronic ruler is damaged due to ranging or speed measurement. Solution: adjust the fast forward frequency to 2Hz and observe whether the diameter change of the log is continuous. If there is still a pause, the ranging encoder is broken and needs to be replaced. If the speed of the roller is inconsistent with the actual speed, the speed encoder needs to be replaced.